Wireless OBD vLinker BM ELM327 Scanner Bluetooth 4.0 OBD2 Car Diagnostic Auto Scan Tool ELM 327 V1.5 For Bmw Bimmercode Mini F54 F55 F56 F57 F60

Wireless OBD vLinker BM ELM327 Scanner  Bluetooth 4.0 OBD2 Car Diagnostic Auto Scan Tool ELM 327 V1.5 For Bmw Bimmercode Mini F54 F55 F56 F57 F60

 

⚠️ Note 🌟 To better understand this product, reference the last picture for a video demonstration

 

⚠️ Note 🌟 

1. Vgate vLinker BM is scanner that is perfectly compatible with BimmerCode/BimmerLink，But the app charges fees for some functions (not for us)

2. if you use IOS phone to work with vLinker BM BT4.0，please open the bluetooth first，then open the APP，Finally, find and connect Bluetooth in the app

 

Vgate vLinker BM+ Supported for BMW models:

For BMW 1 Series F20 F21

For BMW 2 Series F22 F23 F87

For BMW 2 Series Active Tourer F45

For BMW 2 Series Gran Tourer F46

For BMW 3 Series F30 F31 F34 F35 F80

For BMW 4 Series F32 F33 F36 F82 F83

For BMW 5 Series FO7 F10 F11 F18 F90

For BMW 5 Series G30 G31

For BMW 6 Series F06 F12 F13

For BMW Series F01 F02 F03 F04

For BMW 7 Series G11

For BMW X1 F48

For BMW X2 F39

For BMW X3 F25

For BMW X3 GO1

For BMW X4 F26

For BMW X5 F15 F85

For BMWX6 F16 F86

For BMW i3

For BMW i8

For Mini F54 F55 F56 F57 F60

 

Vgate vLinker BM+ Perfectly compatible with Bimmercode/Bimmerlink for BMW professional diagnosis/activation/adjustment scanner:

1. Read/Clear DTC

2. Engine RPM

3. Module Reset

4. Module Activation

5. Remote Control

6. Regeneration

7. Automatic sleep/start

8. Battery Tester

 

Vgate Vlinker BM+ 100% ORIGINAL ADAPTERcompatible with 95% + world car models

1. Professional ELM327 is perfectly compatible with Bimmer Code / Bimmer Link

2. Support Almost All ELM327 / ELM329 / OBDLINK Adapter Software

3. Support for BMW adjustment and programming

4. OBD2 Standard Protocols + More protocols

5. Fully automatic operation

6. Automatic sleep / start

 

Vgate vLinker BM+ is an adapter that is perfectly compatible with Bimmercode Bimmerlink :

Vgate vLinker BM+ is an adapter that is perfectly compatible with BimmerLink:

Support Protocols

Multiple protocols：

--15 ELM format protocols;

-- 23 STN format protocols;

-- Up to 64 user-defined protocols.

 

OBDII 5 standard protocols：

-- SAE J1850 VPW

-- SAE J1850 PWM

-- ISO 9141-2

-- ISO 14230-4

-- ISO 15765-4 CAN

 

Additional protocols：

-- SAE J1939 CAN

-- ISO 11898 (raw CAN)

These protocols cover almost 99% of the OBDII Cars on the marke

 

Rich instruction set, compatible with more APP software：

-- Fully compatible with ELM's AT command set

-- Fully compatible with STN's ST command set

-39 VT macro commands, some instructions are equivalent to the effect of several AT and ST instructions, simplifying the communication steps

-- Compatible with ELM and STN power management solutions

-- Support for instructions, UART silence, battery low voltage, OBD bus silence, etc. Up to 5 ways to go to sleep

-- Support UART active, battery voltage drop, OBD bus active, key, etc. Up to 5 ways to wake up from sleep mode

-- Device sleep power consumption is less than 2 mA

--OBD request byte up to 48 bytes, can meet the needs of some special long framecommunication

-- UART data buffer up to 2K bytes, baudrate increased to 230.4Kbps.

-- 256-byte storage unit

-- More than 100,000 erasable times

-- Read and write operations on any unit in the storage area by using the VT command

-- Mix ID Sending" mode of CAN protocol.

-- Optional formatted send data according to protocol

-- Multiple WM sequence settings

-- Support AT command to manually set WM sequence

-- Support for specifying a protocol or a full protocol-wide temporary WM sequence

-- Support for a permanent link between a protocol and a private WM sequence

 

Package Includes :

1 X New V Gate vLinker BT4.0 Wireless Tool

1 X New User manual