Manual Siphon Hand Pump & Suction Pipe For Pumping Oil And Gas To Transport Oil Liquid Water Chemical Jelly From Air Con Discharge Pipe Etc

Manual Siphon Hand Pump & Suction Pipe For Pumping Oil And Gas To Transport Oil Liquid Water Chemical Jelly From Air Con Discharge Pipe Etc 

⚠️ Red Hose 98cm long 

⚠️Black Thin Hose 120cm 

⚠️ Fat Black Short Hose 40cm

Features :

A tube and a hand pump which is used to convey liquid upwards from a reservoir and then down to a lower level of its own accord. Once the liquid has been forced into the tube, typically by suction or immersion, flow continues unaided

When utilizing air pumps for float etc and the ability to extract all liquid from the container without any leftover waste is incredibly such as oil, gas, water, or chemicals with the manual pump on your car model

Also for air conditioner usage. Using the siphon pipe, easily transport and suck dirty water and jelly out

The ideal companion for lawn mowers, brush cutters, hedge trimmers and other small gasoline-powered tools. Good to keep for emergency, you do not have to queue at the gas station with an iron bucket to buy gasoline. With just a few pumps, you can pump gasoline from the car into the lawnmower

Transfer oil from a car to a tank, transfer oil from a tank to gasoline, transfer gasoline from one car to another

Instructions :

Insert the top tube into the chosen liquid, followed by inserting the bottom red tube into a separate container (if needed, use the included black extension tube). Gently pull the liquid with the left lever a few times to easily extract it

Specifications :

Material: Plastic 

Color: Red

Pump cylinder capacity: 200cc

Inner diameter of hose: 8mm

Outer diameter of hose: 12 mm

Suction tube length: 130cm

Length of oil drain pipe: 130 cm

Length of extension tube: 120 cm

Inner diameter of extension tube: 3 mm

Exterior diameter of extension tube: 5 mm

Flow rate: 5L min

⚠️ Note 🌟 

1. Please do not continue to pull the lever, as long as the liquid flows, you can stop when the water flows automatically 

2. Drain the fuel after each fuel pump

3. After use, it is best to pump a few oils or drip a few drops of oil from the inlet to clean the pipe wall

4. During the oil suction process, try to keep the oil outlet of the oil absorber lower than the oil inlet, so that after the oil is sucked off, you can stop pumping and the oil will continue to drain automatically.

5. After each pumping and cleaning of gasoline, spray a small amount of engine oil into the oil inlet of the pump cylinder to maintain lubrication between the suction cylinder and the rubber ring for next use. This can effectively prevent the oil screw from wearing out and the oil suction extends the service life of the device

6. This product is not suitable for pumping lubricating oil or other viscous semi-liquid liquids

Package Includes :

1 X New Set Of Suction Pump